How to Replace Forklift Hydraulic Motor - Fujian Newgate Electromechanical Equipment Co., Ltd.

For some, removing and replacing the hydraulic motor of a forklift can be a terrifying job. However, when they have the right information and tools, it is something that can be done with ease. The first stage of the repair action is assessing the faulty hydraulic motor. There are various types of hydraulic motor malfunction. These include low power output to the driven wheels, too much noise, and leaks. After factors have established that the motor is beyond repair. Repairs often take most of the anxiety and stress out of a project so it remains vital to make a checklist of any needed replacement components. Take out the bottom bolts holding the motor and lift the battery cover. Make sure that you have disconnected the main battery of the forklift and also relieved yourself from elevating the pressures of the hydraulic system. It is always good practice to avoid such accidents and protect yourself as well. Secondly, take caution when trying to remove the old hydraulic motor from the tank by first unbolting and disconnecting the hoses. Take your time so as not to break down some accessories during the process of removing the defective motor head. After the removed old motors, the new hydraulic motor is fitted by simply doing the reversed activities of the fitting out new motor head. Once again, repeat this procedure while taking a few minutes on all the bolts going down to main drive, cylinder head and all accessories connected to oil motive staff. After a few minutes of work, the new motor is checked for operation, located where all the other faulty motors were. Look for evidence of leaks, listen for fun sounds.

Assuming that everything is as it should be, this is the point where you can put the battery back and continue working.